By fluid typeMineral base
Neat Mineral Cutting Oil
High lubricity for heavy machining, threading and broaching
Neat mineral cutting oils are used undiluted in water in operations requiring maximum lubricity at the expense of cooling: threading, broaching, gear cutting, deep hole drilling and low-speed high-contact-pressure operations.
Standards and specifications
ISO 6743-7 tipo A/B
Specifications
Temperature range-10°C / +80°C
ConcentrationPuro / sin diluir
Fluid baseMineral base
Custom formulation available
Characteristics
- Neat use — maximum lubricity and contact pressure
- Sulphur and chlorine EP additives for severe conditions
- High tool protection — less tool wear
- Superior surface finish compared to coolants
- Available viscosities: 10–200 cSt
Typical applications
- Tap and die threading in steel
- Slot and spline broaching
- Gear cutting — hobbing and shaping
- Deep hole drilling (BTA / Ejector)
- Duplex stainless steel and superalloy machining
Sectors
Machinery & machine toolsAutomotiveGeneral industrySteel
Key advantages
- Tools last longer — lower cost per machined part
- Surface finish Ra lower than equivalent coolants
- No water management — no biological contamination risk
- High compatibility with epoxy paints and sealants
Related cutting fluids
Fluido de Corte de Alto Rendimiento HC/GTL
Base hidrocracking o Gas-to-Liquid para máxima eficiencia y bajo impacto en salud
Fluido de Corte para Inoxidable y Roscado
Alta lubricidad EP para acero inoxidable, dúplex y operaciones de roscado difícil
Taladrina Semisintética
El equilibrio óptimo entre lubricación y refrigeración para mecanizado general
Need a datasheet, sample or quote?
Our technical team responds in less than 24h with full datasheet, safety data sheet and price offer.