Industrial Range

Industrial Oils

Our broadest range. Formulated to work under the most demanding conditions: high load, extreme temperature and long drain intervals. Available in mineral, hydrocracking and synthetic (PAO, esters) base.

HLP Hydraulic Oil

High anti-wear protection for industrial hydraulic systems. ISO VG 32/46/68/100.

• ISO VG 32–100
• Anti-wear ZnDTP
• Antioxidant / anti-foam

EP Gear Oil

With extreme pressure additives for gearboxes, change gears and helical gears.

• ISO VG 68–680
• AGMA 9005-F16
• Mineral / synthetic base

Compressor Oil

High thermal and oxidative stability. For screw, vane and piston compressors.

• ISO VG 32–150
• Low carbon residue
• Interval >8,000 h

Transmission Oil

Multi-function for manual transmissions, axles and differentials in industrial machinery.

• SAE 75W-90 / 80W-140
• GL-4 / GL-5
• Heavy metal-free

Request full technical data sheetRequest free sample

Greases

Technical Greases

From automatic lubricators to manual applications on bearings, joints and slideways. Lithium, lithium complex, aluminium complex, bentonite and PTFE thickeners depending on the application.

Lithium EP 2 Grease

High-penetration multi-purpose anti-wear grease. Ideal for bearings and joints.

• NLGI 2
• –20 °C to +130 °C
• Antioxidant / EP

Lithium Complex Grease

Higher temperature range than standard lithium grease. For ovens and dryers.

• NLGI 2
• Up to +200 °C
• Water resistant

Bentonite Grease

No defined drop point. For steelworks, foundry furnaces and high temperatures.

• NLGI 1–2
• Up to +260 °C
• Mineral / synthetic base

PTFE Grease

Dry low-friction lubrication for mechanisms incompatible with liquid oil.

• NLGI 2
• –40 °C to +250 °C
• Colourless / food-safe

View full grease catalogue — 26 sub-familiesRequest full technical data sheetRequest free sample

NSF H1 Certified

Food-Grade Lubricants

Complete H1 range for the food and beverage industry. Formulated with FDA 21 CFR §178.3570 approved ingredients. HACCP, IFS Food and BRC compliant. Odourless and tasteless.

H1 Multi-purpose Oil

Chain, slideway and gearbox oil on food production lines.

• NSF H1
• ISO VG 32–220
• FDA 21 CFR §178.3570

H1 Lithium Complex Grease

For bearings and slideways in machinery with incidental food contact.

• NSF H1
• NLGI 2
• Up to +180 °C

H1 Compressor Oil

Lubrication of air compressors in food and beverage factories.

• NSF H1
• ISO VG 46/68
• High flash point

H1 Lubricant Spray

Quick-lubrication aerosol for preventive maintenance and small applications.

• NSF H1
• 400 ml
• Dry / penetrating

Request full technical data sheetRequest free sample

In-house R&D

Cutting Fluids

Metalworking fluids and coolants without boron, formaldehyde or MEA. Extended service life, low foam and excellent performance in machining steel, aluminium and cast iron.

Semi-synthetic Coolant

Optimal balance between lubrication and cooling. For steel and cast iron machining.

• Concentration 5–8%
• pH 9.0–9.5
• Boron and MEA free

Synthetic Coolant

Greater cooling capacity. Ideal for high-speed operations and grinding.

• Concentration 3–6%
• pH 8.8–9.4
• Transparent / low residue

Mineral Cutting Oil

For heavy machining, threading and broaching where high lubricity is required.

• Neat or blended
• High EP additive
• Antioxidant / anti-corrosion

Aluminium Cutting Oil

Chlorine-free to avoid staining. Excellent brightness and surface finish.

• ISO VG 10–22
• Chlorine-free
• High surface brightness

Request full technical data sheetRequest free sample

Speciality

Release Agents

Release agents for precast concrete, injection-moulded plastics, rubber and composite materials. Water-based, solvent-based and wax-type formulations depending on the process.

Concrete Release Agent

Biodegradable water-based. No concrete staining. Easy formwork cleaning.

• Water-based
• Biodegradable
• For timber, metal and plastic

Rubber Release Agent

For compression and injection moulding of technical rubbers and silicone.

• Silicone-free (paintable version)
• High temperature
• Spray / concentrate

Plastic Release Agent

Injection moulding of PP, PE, ABS and polycarbonate. No migration or staining.

• Silicone-free available
• Thermoplastics
• Spray or bulk

Request full technical data sheetRequest free sample

Service

Contract Packaging

We produce and package under your brand. From minimum batches of 200L to orders of several thousand litres. Full documentation: technical data sheet, safety data sheet, certificate of analysis and custom labelling.

Packaging in cans (1–25L)

Formats 1L, 4L, 5L, 10L and 25L in HDPE. Screen-printed or self-adhesive label.

• From 200 units
• Custom labelling
• Documentation included

Drum packaging (200L)

Metal or plastic 200L drums. Palletised and shrink-wrapped.

• 200L drum
• Metal / HDPE
• COA included

IBC packaging (1,000L)

1,000L IBC containers for high-volume customers. Batch traceability.

• IBC 1,000L
• Full traceability
• TDS + SDS

Request full technical data sheetRequest free sample